Dispensible Fluxes
|
Technical Documents
|
MSDS Safety Documents
|
AWS Class
|
Description
|
Availability
|
Handy Flux Type D
For automatic dispensing as controlled dabs or sprays.
|
N/A
|
92K |
FB3G
|
This flux has the same combination of salts as Handy Flux, with additives to provide a lower (pourable ) viscosity . Type DB has an additional boron formulation for use with more refractory
oxides, such as automated brazing of carbides.
|
50 lb (22.68 kg) pails and 12.5 lb. (5.67 kg.) bottles.
|
Handy Flux Type DB
Same as above.
|
N/A
|
90K |
FB3H
|
Same as above.
|
Same as above
|
Sure Flo Type D, Sure Flo Type DB
For automatic dispensing as controlled deposits from applicator guns.
|
N/A
|
95K |
FB3G,
FB3H
|
Same as Handy Flux Type D. Same fluxing salts formulated with a viscosity to allow dispensing from pneumatic equipment, provides excellent protection.
|
1 and 5 lb. (454g. and 2.27 kg.). Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Handy Flo DF 110
Ferrous, non-ferrous base metals and carbides.
|
77K |
95K |
N/A
|
Restrictive flow, longest life flux system of the Handy Flo series.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 111
Ferrous, non-ferrous base metals and carbides.
|
N/A
|
92K |
N/A
|
Restrictive flow, longest life flux system of the Handy Flo series.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 121
Ferrous and non-ferrous metals. Ideal for small parts.
|
N/A
|
92K |
N/A
|
Very fluid flux flow provides better filler metal flow and reduced voids.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 170
VOC-Free system for ferrous and non- ferrous metals and carbides.
|
N/A
|
88K |
N/A
|
Water
soluble, Volitile Organic Component (VOC) Free material - Restrictive
flow.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 712
Aluminum Brazing Flux.
|
N/A
|
93K |
N/A
|
Corrosive, chloride based system that works well on 3000 and 6000 series aluminum with Al 718 and Al 719 brazing.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 718
Aluminum Brazing Flux.
|
N/A
|
98K |
N/A
|
Corrosive, chloride based system that works well on 3000 and 6000 series aluminum with Al 718 and Al 719 brazing.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 720
Aluminum Soldering Flux.
|
N/A
|
99K |
N/A
|
Non-corrosive
flux that works with Al 718 Al 719 and zinc-aluminum alloys.
|
1 and 5 pound jars. Bulk packaging also available.
|
Handy Flo DF 876
Corrosive solder flux for joining copper brass, steel nickel and other plated surfaces.
|
N/A
|
86K |
N/A
|
Solder flux requires slow heating to avoid spattering. Restrictive flow.
|
1 and 5 pound jars. Bulk packaging also available.
|
Dry/Powdered
Fluxes
|
Technical Documents
|
MSDS Safety Documents
|
AWS Class
|
Description
|
Availability
|
Handy Dry Flux 6040- Powder
For applications where a dry low volatile flux is desired.
|
N/A |
88K |
FB3F
|
The 6040 flux is active in fluxing refractory oxides, and 6040 is recommended for the 1200° to 1500°F range (650°-815°C).
|
1 lb. (454g.) jars. Also 25 lb. (11.34 kg.) pails.
|
B1 Dry Flux
Flux for general purpose and Carbide Brazing applications.
|
N/A |
92K |
N/A
|
Ideal for salt bath brazing. Dry flux is boron modified for extra protection. Dry version of Handy B1 Flux.
|
1 and 5 lb. (454g. and 2.27 kg.). Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Handy Flux Dry
General purpose flux formulated for "Hot Rodding" or mixing with water for use as a paste flux.
|
N/A
|
90K |
N/A |
This flux was developed to stick to a heated wire or rod that is dipped into the container. Also can be mixed with water or alcohol to make a paste flux.
|
1
and 5 lb. (454g. and 2.27 kg.). Also 25lb. (11.34 kg.) pails.
|
Handy Flux Hi-Temp M - Paste or Powder
High temperature furnace,
induction or torch brazing, requiring maximum protection.
|
N/A |
92K |
N/A
|
Useful
in the brazing of carbides, stainless and alloy steels, and
nickel base alloys using copper alloy and gold alloy filler
metals requiring brazing temperatures between 1650°-2200°F
(899°-1204°C).
|
1 and 5 lb. (454g. and 2.27 kg.). Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Handy
Fluxes
|
Technical Documents
|
MSDS Safety Documents
|
AWS Class
|
Description
|
Availability
|
Handy
Flux - Paste
All purpose, low temperature flux for use in brazing both ferrous and non ferrous metals and alloys.
|
N/A |
94K |
FB3A
|
Handy Flux is an active flouride/borate -type flux which begins to melt and dissolve oxides at 600°F (320°C). Fully molten at 1100°F (600°C), it provides excellent protection
of parts up to 1600°F (870°C). Cleanup shoul dbe with hot water.
|
1/2, 1 and 5 lb. (227, 454 g. and 2.27 kg.) jars. Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Handy
Flux Type B-1 - Paste
For brazing high chromium stainless steels, tungsten and chromium carbides, and molybdenum alloys.
|
N/A |
90K |
FB3C
|
Particularly in applications where a larger amount of refractory oxides may form, use Handy Flux Type B-1 (boron modified). Its temperature range is 1100° to 1700°F (600°-925°C).
It is valuable where local over-heating may occur, as in fast induction heating.
|
1 and 5 lb. (454 g. and 2.27 kg.). Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Handy
Flux Type A-1 - Paste
For brazing aluminum bronze and other alloys containing small amounts of aluminum and/or titanium.
|
N/A |
97K |
FB4A
|
Type A-1 will readily flux the difficult refractory oxides that form on these alloys. It is not recommended for use with aluminum or titanium base alloys. Active range 1100° to
1600°F (600° to 870°C).
|
1 lb. (454 g.) jars.
|
Handy
Flux Type LT - Paste
For applications with long heating cycles, such as many furnace brazing jobs.
|
N/A |
90K |
N/A
|
More effective than a general purpose flux in long-heating cycle applications. Lower fluorine content results in higher melting temperature. More viscous, less active, but has a longer
life. Also useful for induction heating applications, where tendency to overheat may exist. Active range: 1200° to 1600°F (650° - 870°C).
|
1 lb. (454 g.) jars.
|
Handy
Flux Type TEC - Liquid
For metal joining at temperatures in the 500° to 800°F (260° - 425°C) range.
|
N/A |
93K |
N/A
|
This widely used liquid flux provides excellent performance in soldering applications.
|
1 pt., 1 qt. and 1 gal. (.475, .95, and 3.79 liter) containers.
|
Handy
Liquid Flux - Liquid
For brazing in furnaces with poor atmospheres or joining jewelry parts above 1160°F (625°C).
|
N/A |
90K |
FB3E
|
Used where only a limited fluxing ability is desired. |
1 pt., 1 qt. and 1 gal. (.475, .95, and 3.79 liter) containers.
|
Handy
Flux Hi-Temp - Paste
Used where brazing temperatures go into the 1600° to 2000°F (870°- 1100°C) range or for considerable lengths of time above 1450°F.
|
N/A |
94K |
FB3D
|
This high temperature flux contains still less fluorine than type LT. It is often used with brazing alloys melting above 1600°F (870°C) - and provides the adherence and fluxing
action a general purpose flux cannot give at these temperatures.
|
1 lb. (454 g.) jars. Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Handy
Flux Hi-Temp Boron modified - Paste
For high temperature Ag, Cu, Ni brazing in the range of 1600° to 2200°F (870°-1200°C), involving longer time or base metals with refractory oxides.
|
N/A |
90K |
FB3D
|
Particularly useful where refractory oxides are formed on the metals being joined. This added capability results from the addition of a small amount of finely powdered boron to the
flux.
|
1 lb. (454 g.) jars.
|
Handy
Flux Hi-Temp M - Paste or Powder
High temperature furnace, induction or torch brazing, requiring maximum protection.
|
N/A |
92K |
N/A
|
Useful in the brazing of carbides, stainless and alloy steels, and nickel base alloys using copper alloy and gold alloy filler metals requiring brazing temperatures between 1650°-2200°F
(899°-1204°C).
|
1, 5, 25 and 50 lb. (454 g., 2.27 kg., 11.34 kg. and 22.68 kg.) containers.
|
Sure Flo Fluxes
|
Technical Documents
|
MSDS Safety Documents
|
AWS Class
|
Description
|
Availability
|
Sure Flo Flux - Paste
General Purpose, low temp. brazing flux which provides excellent adhesion and creamy smooth consistency. For brazing ferrous & nonferrous alloys.
|
N/A |
95K |
FB3A
|
Same as Handy Flux, Sure Flo Flux dissolves the oxides that form on copper, brass, nickel, monel, steel, and stainless steel during heating. Will not crystallize.
|
1 and 5 lb. (454 g. and 2.27 kg.). Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
Sure Flo Black - Paste
Same as Handy B-1. Ideally suited for induction heating where localized over-heating, or longer heating cycles may occur.
|
N/A |
95K |
FB3C
|
Same as Handy Flux B. Ideally suited where refractory oxides may form (chromium tungsten, etc.). Better brushability and excellent adhesion - will not splatter.
|
1 and 5 lb. (454 g. and 2.27 kg.). Also 25 and 50 lb. (11.34 and 22.68 kg.) pails.
|
